Audio Technica System 901 Transmitter and Bodypack with Pro 35cW Audio Technica

THIS BUNDLE INCLUDES

• Audio Technica System 901 Transmitter and Bodypack: ATW-901A/G
• Audio Technica Cardioid Condenser Clip-on Instrument Microphone: PRO35CW

ATW-901A/G

Audio-Technica’s System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in handheld, headworn, guitar, lavalier and body-pack configurations. The system offers four compatible user-switchable VHF channels (169.505, 170.245, 171.045, and 171.905 MHz). 

Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.

• Easy to use, with clear and natural sound quality
• 4 frequency-coordinated selectable VHF channels
• 1/4″ balanced and unbalanced XLR output connectors compatible with a wide variety of audio adapters
• Reliable performance and rugged manufacturing
• Advanced dipole antenna system to increase operating range

CHARACTERISTICS

GENERAL SYSTEN SPECIFICATIONS

• Operating Frequencies: VHF high band, 169 to 172 MHz
• Modulation Mode: FM
• Maximum Deviation: +/- 10 kHz
• Dynamic range: > / = 90 dB (Weighting A), typical
• Total harmonic disturbance: <1% (at 1 kHz, deviation of +/- 10 kHz)
• Total harmonic distortion: <1% (at 1 kHz, deviation of +/- 10 kHz)
• Operating Range: 200 ‘(60 m), typical (Open environment without signal interference)
• Operating Temperature Range: 40 ° F (4 ° C) to 110 ° F (43 ° C) (Battery and LCD display performance may be affected by very low temperatures.)
• Frequency Response: 80 Hz to 13 kHz
• Maximum Simultaneous Use (Recommended): 200 ‘minimum

RECEIVER SPECIFICATIONS

• Receiver System: Dual antenna system, without diversity and a single channel Image rejection: 50 dB minimum
• RF sensitivity: 20 dBuV at 60 dB S / N (50 ohm termination)
• Audio Output: Nominal output level; XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load); 1/4 “(6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
• Power Supply: 100-240 V AC (50/60 Hz) at 12 DC. 5 A (positive center) switched mode, external power supply
• Dimensions:0 mm (7.48 “) wide x 46.2 mm (1.82”) high x 128.5 mm (5.06 “) deep
• Net Weight:0 oz (337 g)
• Accessory Included: Power Supply

BODY PACK TRANSMITTER SPECIFICATIONS

• RF Power Output: 10 mW
• False Emissions: According to federal and national regulations
• Input Connections: Connector with four pin anchor; Pin 1: Earth; Pin 2:
• Instrument input; Pin 3: Microphone input; Pin 4: DC + 9V polarization
• Batteries: Two 1.5V AA type, not included
• Battery Life: 8 hours (alkaline) (Depending on the type of battery and usage pattern)
• Dimensions:2 mm (2.76 “) wide x 24.9 mm (0.98”) deep x 103.7 mm (4.08 “) high
• Net Weight:8 oz (80 g), without batteries

HANDHELD TRANSMITTER SPECIFICATIONS

• RF Power Output: 10 mW
• False Emissions: According to federal and national regulations
• Batteries: Two 1.5V AA type, not included
• Battery Life: 8 hours (alkaline) (Depending on the type of battery and usage pattern)
• Dimensions:91 “(251.8mm) long, 2.11” (53.5mm) diameter
• Net Weight:2 oz (260 g), without batteries
• Accessory Included: Quiet-Flex ™ AT8456a Pedestal Clamp

PRO35CW

Designed for sax, toms, brass and percussion, the PRO35cW excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance. The included UniMount^® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source. 

• UniMount® clip permits accurate positioning, provides shock resistance and protects element
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Extended frequency response captures subtle nuances of the performance
• Terminated with locking 4-pin connector for A-T UniPak^® body-pack wireless transmitters
• 55″ (1.4 m) cable
• Includes AT8418 instrument mount for brass, reeds, drums, etc

CHARACTERISTICS

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Patter: Cardioid
• Cable: 5.5′ (1.4 m) long (permanently attached to microphone), 0.10″ (2.6 mm) diameter, 2-conductor, shielded cable with HRS4-type connector
• Accessories Included:  AT8418 UniMount® microphone instrument mount; soft protective pouch