DESCRIPTION
The PSE system is a UHF diversity receiver with 16 selectable channels. The multi channel microphone receiver features a volume control, channel display, Diversity Antennas and IR Sync. The PSE has an XLR 1/4″ output and squelch adjustment. The PSE is available with a handheld, body pack with headset, lav, or instrument cable.
The PSER can be used and will sync with either the HH52 or MBP52 transmitters. The HH52 has a gain control and an on/off switch. Both transmitters are powered by 2 AA batteries. The MBP52 body pack transmitter has a 0/-10/Mic selector switch.
- 300′ Range
- 16 Selectable UHF Frequencies
- Diversity Antennas
- Single/Dual Rack Mount Included
PSER Receiver
- Output Volume Control
- IR Sync Receiver to Transmitter
- AF Level Indicator
- Active Antenna Indicator
- Squelch Adjustment
- XLR / 1/4″ Outputs
- Detachable BNC Antennas
- Metal Chassis
HH52 Transmitter
- Dynamic Microphone Element
- On/Off Switch
- IR Sync Transmitter to Receiver
- High/Low RF Switch
- 10 mW / 5 mW
- Metal Chassis
- Operates on 2 AA Batteries (up to 8 hours Alkaline)
- Dimensions: 9.8″ x 2.1″ (250 x 53 mm) (L x Dia.)
- Weight: 9.5 oz. (270 g)
MBP52 Transmitter
- Low Battery Indicator
- 3 Position Switch
- IR Sync Transmitter to Receiver
- Mic/0/-10dB
- Operates on 2 AA Batteries (up to 8 hours Alkaline)
- Dimensions: 3.3″ x 2.6″ x 1″ (85 x 65 x 24 mm) (HxWxD)
- Weight: 2.8 oz (80 g)
SPECIFICATIONS
PSE SYSTEM SPECS | |
---|---|
Available Frequencies | 16 |
Frequency Ranges | CODE D 584~607MHz CODE N 518~542MHz |
Band | UHF |
Operating Range | Under Typical Conditions 300′ (92 m), actual range depends on RF signal absorption, reflection, and interference. |
Audio Frequency Response | (+/-3 dB) 60 Hz ~ 16 kHz |
Total Harmonic Distortion | (+/-30 kHz deviation 1 kHz tone): <1% |
Dynamic Range | >90 dB A-weighted |
Operating Temperature Range | 14° F to 122° F (-10° C to 50° C), battery characteristics may limit this range |
PSER RECEIVER | |
Audio Output Level (+/-30 kHz deviation, 1 kHz tone) | XLR Connector (into 600 Ohms load) -12 dBV 1/4″ Connector (into 3 k Ohms load) -18 dBV |
Output Connections | 1 Male XLR Balanced 1/4″ Balanced |
Output Impedance | XLR connector 200 Ohms 1/4″ connector 1 k Ohms |
XLR Output | Impedance balanced Pin 1: Ground (cable shield) Pin 2: Audio + Pin 3: No Audio – |
Sensitivity | -93 dBm for 30 dB |
Image Rejection | >90 dB |
Casing | Metal Chassis EIA STANDARD 1 U |
Dimensions | 1.7″ x 8.3″ x 6.3″ (44 x 212 x 160 mm) |
Weight | 31 oz (880 g) |
Power Requirements | 12-18 V DC at 300 mA, supplied by external power supply |
HH52 HANDHELD TRANSMITTER | |
Max Audio Input Level | 0 dBV |
Gain Adjust | Trim Pot |
RF Output | 10 mW, 5 mW |
Frequency Response | 70 Hz ~ 15 kHz |
Dimensions | 9.8″ x 2.1″ (250 x 53 mm) (LxDia) |
Weight | 9.5 oz (270 g) (without batteries) |
Power Requirements | 2 “AA” size alkaline or rechargeable batteries |
Battery Life | About 8 hours (alkaline) |
MBP52 BODY PACK TRANSMITTER | |
Max Audio Input Level | 0 dBV to +10 dBV |
Gain Adjust | Mic / 0 dB / -10 dB |
RF Output | 10 mW |
Input Impedance | 5 k Ohms |
Dimensions | 3.3″ x 2.6″ x 1″ (85 x 65 x 24 mm) (HxWxD) |
Weight | 3.0 oz (85 g) |
Power Requirements | 2 “AA” size alkaline or rechargeable batteries |
Battery Life | About 8 hours (alkaline) |