DESCRIPTION
The RCF HDL 28-A is a compact bi-amped 2-way active touring system for a wide range of applications, both indoors and outdoors, with an emphasis on vocal intelligibility. It features two 8-inch woofers and an impressive 3-inch titanium compression driver. The time coherent waveguide is the result of in-depth research and design. Following the HDL 30-A philosophy, the HDL 28-A shares the composite material cabinet, the zero-degree phase and ultra-linear amplitude response. The built-in 2200 watt class-D amplifier delivers excellent playback clarity and up to 135 decibels SPL max. The RCF HDL 28-A features state of the art RCF transducers with lightweight neodymium magnets. Considering its acoustical power, it has a remarkably low weight for easy handling and flying.
MONITORING AND MANAGEMENT NETWORK
The new version of RDNet offers comprehensive improvements. The audio system is now configurable in Groups of boxes or in the new Array clusters, the Air Compensation and Cluster Size processes are now more precise and controllable, as well as the FiRPHASE filter gain. Subwoofers configuration is now faster, even in complex EndFire configurations.
The RCF HDL 28-A features state-of-the-art RCF transducers with neodymium magnets. RCF’s experienced engineering teams have specially developed and matched each component — starting from the power supply through the input board to the amplifiers and transducers right up to the complete HDL 28-A System
HIGH FREQUENCIES
- High-performance RCF ND840
- 0-inch diaphragm titanium compression driver
- 4-inch exit throat
- 750 Hz Crossover Point
LOW FREQUENCIES
- 2 X 2.5”voice coil neodymium 8” woofers
- Linear low frequencies handling down to 65 Hz
- Water resistant fibre doped cone
- Polycotton M-roll surround
- Hypervented magnetic structure
The advanced rigging concept derives directly from its big brothers:
the RCF HDL 30-A and HDL 50-A. The integrated mechanics are both fast and reconfigurable, allowing the system engineer to create J-shaped and spiral arrays. The hardware is designed for easy and fast setup. The angle can be adjusted on the ground before the system is hung and slipped automatically into the correct position as the array is pulled up. Up to 20 HDL 28-A modules can be fastened on a single flybar.
CHARACTERISTICS
Acoustical specifications
- FREQUENCY RESPONSE: 50 Hz ÷ 20000 Hz
- MAX SPL @ 1M: 135 dB
- HORIZONTAL COVERAGE ANGLE: 100°
- VERTICAL COVERAGE ANGLE: 15°
Transducers
- COMPRESSION DRIVER: 1 x 1.4” neo, 3.0” v.c
- WOOFER: 2 x 8” neo, 2.5” v.c
Input/Output section
- INPUT SIGNAL: bal/unbal
- INPUT CONNECTORS: XLR, RDNet Ethercon
- OUTPUT CONNECTORS: XLR, RDNet Ethercon
- INPUT SENSITIVITY: +4 dBu
Processor section
- CROSSOVER FREQUENCIES: 750 Hz
- PROTECTIONS: Thermal, RMS
- LIMITER: Soft Limiter
- CONTROLS: Preset, RDNet bypass
- RDNET: Yes
Power section
- TOTAL POWER: 2200 W Peak, 1100 W RMS
- HIGH FREQUENCIES: 600 W Peak, 300 W RMS
- LOW FREQUENCIES: 1600 W Peak, 800 W RMS
- COOLING: Forced
- CONNECTIONS: Powercon IN/OUT
Standard compliance
- CE MARKING: Yes
Physical specifications
CABINET/CASE MATERIAL: PP Composite
- HARDWARE: Array fittings
- HANDLES: 2 Side
- GRILLE: Steel
- COLOR: Black
Size
- HEIGHT: 294 mm / 11.57 inches
- WIDTH: 569 mm / 22.4 inches
- DEPTH: 491 mm / 19.33 inches
- WEIGHT: 6 kg / 45.42 lbs
Shipping informations
- PACKAGE HEIGHT:375 mm / 14.76 inches
- PACKAGE WIDTH:650 mm / 25.59 inches
- PACKAGE DEPTH: 500 mm / 19.69 inches
- PACKAGE WEIGHT: 6 kg / 52.03 lbs